Odor / Chemical Control: The
Hi-C Carbon Weave filter absorbs airborne chemicals and noxious gases
and odors. It comes standard on the H600 and is an option on the I600.
The Carbon Block has two microsuppress filters surrounding the carbon
bed to contain the carbon within the filter and help inhibit the growth
of microbials on the carbon filter. The regular carbon filter is 100%
coconut shell and is used in the Airpura R600 and UV600. The Airpura
V600 has a Super Enhanced Carbon blend that has been specially treated
to deal with specific chemicals, like VOCs, formaldehyde or ammonia.
HEPA
Filter: Developed by the atomic energy commission to filter
radio active particles as small as 0.3 microns. True HEPA 80 sq ft:
Warm rolled to prevent cracking, 10 pleats per square inch maximizes
filtration (other systems only use 6-8 folds). Spacers to make sure
every fold filters. Traps particulate up to .3 microns. All models with
HEPA filters except the I600 come standard with a new metal capped HEPA
filter, which removes the possibility of any plastic vapors from non-metal
caps. The closed end on the HEPA cylinder completely seal the particle
filtration process, eliminating the possibility of by-pass by particle-bearing
air. The I600 HEPA can be upgraded to the metal cap. Replace HEPA filters roughly
every 5 years.
Pre-filter: 570 sq in
x 1" deep, can be vacuumed from the exterior of the unit and should
be changed every 12 months, depending on use.
Wall Mount Options: Suspension
brackets are available for vertical (AP-WALLH $149.95) or Vertical
(AP-WALLV $99.95) mounting on a wall or column.
ETL Certification: Conforms
to ANSI/UL 507 CSA C22.2 no 113
Warranty: 5 year parts and labor.
Looking for a lower priced HEPA air purification
technology?