Venmar Solo 1.5 / 2.0 Air
Exchange System
Heat Recovery Ventilation Systems
Air Exchanger Systems for Home
Ventilation
 Venmar Ventilation Solo Heat Recovery Ventilators are the comfortable home solution for improved indoor air quality.
Venmar HRV ventilation systems are a very popular choice and one of the best
heat recovery air exchangers (HRV) of its category. Solo air exchangers deliver
an exceptional level of indoor air quality and excess humidity control.
Featuring a robust polypropylene core, the Solo 1.5 provides mid-size (refer
to local building code) homes with fresh
air all year and retains heat in colder climates for improved home comfort. Optional filter upgrades are available to boost the filtration level while versatile
main and optional wall controls make it easy to manage excess humidity and air flow
throughout the home.
Heat Recovery Ventilator (HRV)
The Venmar Solo heat recovery ventilator (HRV) is the proper
choice for colder climates, where home heating is essential. The Venmar Solo
HRV keeps the home supplied with a steady flow of fresh outdoor air. As
stale, warm air is expelled, the heat recovery core warms the incoming
fresh, colder air before it is distributed throughout the home. The result
is a constant supply of fresh air, no unpleasant drafts and greater home
comfort. In addition to heat recovery and improved air quality, the HRV
provides necessary ventilation while controlling excess humidity.
How Venmar Home Ventilation
Systems Work
FREE Shipping Contiguous
USA
(excludes replacement filters and installation kits)
Venmar Solo 1.5 HRV Technical specifications
| |
Solo 1.5
 |
Solo 2.0
|
| Rate of air flow (cfm)* (low/high): |
64-150 cfm |
117-189 cfm |
| Filter: |
Washable foam |
Washable foam |
| Diameter of inside port: |
6’’ (15 cm) |
6’’ (15 cm) |
| Diameter of outside port: |
6’’ (15 cm) |
6’’ (15 cm) |
| Voltage: |
120 volts |
120 volts |
Apparent sensible effectiveness
at 0°C (32°F): |
81% at 31 l/s (66 cfm*) |
70% at 56 l/s (119 cfm) |
Apparent sensible effectiveness
at -25°C (-13°F): |
80% at 37 l/s (78 cfm*) |
80% at 37 l/s (78 cfm) |
Total recovery efficiency (cooling)
at 35°C(95°F): |
Not tested |
Not tested |
| Voltage: |
120 volts |
120 volts |
| Power: |
150 watts |
240 watts |
| Amp: |
1.3 amperes |
2.1 amperes |
| Dimension height: |
16.5 in (42 cm) |
16.5 in (42 cm) |
| Dimension width: |
30.25 in (76.8 cm) |
30.25 in (76.8 cm) |
| Dimension depth: |
17.175 in (45.2 cm) |
17.175 in (45.2 cm) |
| Weight (approx.): |
65 lb (29.5 kg) |
67 lb (30.5 kg) |
| Wall control: |
Supra, Venta or Ultima
(sold separately) |
Supra, Venta or Ultima (sold separately) |
| HVI Certified (Home Ventilating
Institute): |
Yes |
Yes |
| Warranty - Core or enthalpy wheel: |
Limited lifetime |
Limited lifetime |
| Warranty - Parts: |
5 years |
5 years |
* cfm: Cubic feet per minute
Main Wall Control Options
(click image to enlarge)
|
 |
 |
 |
|
Venta Wall Control $39
The Venta model
contains pull out tab with simple instructions and easy-to-use
settings (off, low an high exchange speed). |
Supra Wall Control $78
The Supra model
includes maintenance light indicator, three operating modes (off,
intermittent, low and high exchange speed) and humidity indicator.
|
Ultima Wall Control
$130.20
The Ultima control includes maintenance light indicator, six
operating modes including a recirculation setting (off,
intermittent, low and high exchange speed, filtration), and humidity
indicator. |
Optional Controls (click
image to enlarge)
|
 |
 |
|
20/40/60-Minute Push-Button $30.45
This optional control provides three convenient settings (20, 40,
and 60 minute) to help control excess humidity. |
60-Minute Mechanical Timer $60.50
This timer allows up to 60 minutes of high speed operation. |
Maintenance
Regular maintenance should be performed every 3 months. Annual
maintenance should also take place every fall season. Remove filters.
- Vacuum to remove most of the dust.
- Wash with a mixture of warm water and mild soap. Rinse
thoroughly. Shake filters to remove excess water and let dry.
NOTE: Washing the filters in the top tray of the dishwasher is
possible, but the aluminum frame might tarnish.
- Replace the optional filters (electronic, pleated or charcoal)
if applicable. Do not wash in water.
- Check the exterior air intake hood. Make sure no leaves, twigs,
ice or snow have been drawn into the vent. Clean if necessary.
Additional Information (pdf files require Adobe Reader)
- Technical Data Sheet
- Typical Installation Options
- Installation Manual
- User Guild
Get the Ultimate in Clean Air for Your Home
Combine an
Air Oasis Induct Air Purifier with a Venmar Ventilation System and receive 10% discount off
the Air Oasis induct unit. The Venmar Air Exchange System is fabulous for recovering heat or energy, providing fresh air, controlling humidity and removing particulate (dust, pollen, dander, etc.), but by adding the powerful broad-spectrum pollution purification abilities of an
Air Oasis HVAC Induct Air Purifier, you get the ultimate in whole-house clean air.
Air Oasis air purifiers destroy bacteria, viruses, pesticides, herbicides, mold spores, chemical fumes and gases, VOCs, odors and more
from your ductwork and every room served by a vent. The residential and business HVAC (heating, ventilation and air conditioning) induct model
is designed for use with forced-air heating and central air conditioning systems (HVAC) to purify the air in all rooms served by ductwork in small to large single-family homes and office buildings. Turn your central heating and cooling system into an air-cleaning machine to significantly reduce pollutants and contaminants in your entire home or business.
For
more information, see the Air Oasis Air Purifiers.
Order Toll FREE at 866-875-4386
(USA and Canada Only. All others call 503-537-0636
PST)
|
